How do I fix a Hisense Google TV that will not power on?
Answer
Plug the TV directly into a wall outlet instead of a power strip, then try the power button on the TV itself. A full power reset like this usually does not erase your apps or Google TV data.
Before you start: stop right away if…
- Use a properly rated wall outlet and avoid damaged cords or wet areas around the TV power connection.
- A full power reset of this kind usually does not erase Google TV apps or accounts, but a later factory reset would.
Follow these steps
Move power to a wall outlet
Unplug the TV from the power strip or surge protector and plug it directly into a known-good wall outlet.
You should see: The TV has a direct power path without the strip in between.
Do a short power drain
With the TV unplugged, press and hold the TV’s physical power button for about 30 seconds, then plug it back into the wall outlet.
You should see: Residual power is cleared and the TV is ready for a fresh startup attempt.
Power on from the TV button
Press the power button on the TV itself rather than the remote and wait up to a minute for the Google TV logo or picture.
You should see: The TV powers on, or a status light responds even if the picture is still dark.
Retest the remote after the TV wakes
If the TV turns on from the panel button, try the remote again and replace remote batteries if it still fails.
You should see: You can control volume, inputs, and apps normally.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: No picture, no startup sound, and no status light when using the remote, plus whether the TV is plugged into a strip, surge protector, or wall outlet.
Before you change anything: Confirm the wall outlet works with a lamp or another device. Note whether any LED on the TV blinks when you press power. Have the TV remote nearby after power is restored for input and account checks. Unplug by gripping the plug, not by yanking the cord hard.