How do I fix an EcoFlow Delta 2 that will not charge from solar?
Answer
Verify the solar cable path, confirm the panel open-circuit voltage is within EcoFlow’s solar input limit for the Delta 2, and ensure positive and negative leads land on the correct XT60 solar/car input pins. Retest in full sun after a secure connection.
Before you start: stop right away if…
- Never short solar leads together or connect a panel that exceeds the Delta 2’s solar voltage limit—this can damage the unit.
Follow these steps
Inspect the full cable path
With the panel disconnected from the Delta 2, check every connector from panel to adapter to XT60 for bent pins, corrosion, or loose MC4/XT60 fits. Replace damaged adapters before retesting.
You should see: Cables and connectors look intact and seat firmly.
Confirm panel voltage is in range
Check the panel’s labeled open-circuit voltage (Voc) against EcoFlow’s published solar input limit for the Delta 2. If Voc is above the limit, do not connect that panel alone; use a compatible panel or an EcoFlow-approved configuration.
You should see: You know the panel voltage is within the Delta 2’s allowed solar input range.
Verify XT60 polarity
Confirm that panel positive and negative reach the correct pins on the EcoFlow solar/car XT60 input per EcoFlow’s diagram. Reversed polarity often yields zero charge even when the panel works on other gear.
You should see: Polarity matches EcoFlow’s documentation before you reconnect.
Retest in full sun
Connect in bright sun, wake the Delta 2, and watch Input for solar watts. If wall charging works but solar still shows zero with correct voltage and polarity, try an official EcoFlow solar cable or contact EcoFlow support with panel Voc and any on-screen codes.
You should see: Solar input watts appear, or you have clear details for EcoFlow support.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: No solar input watts on the Delta 2 display, while AC wall charging still works; any solar error icons or codes
Before you change anything: Read the Delta 2 solar input voltage and connector specs in the official EcoFlow manual. Work in dry conditions; do not short panel leads. Confirm the panel is in direct sun during tests. Do not share account passwords with unexpected callers.