How do I set up a Thrustmaster T98 steering wheel on a Windows PC?
Answer
Most often the wheel needs a direct USB connection, the official Windows driver package from Thrustmaster, and manual steering/throttle/brake bindings in the game’s Controls settings.
Before you start: stop right away if…
- Download drivers only from the official Thrustmaster site. Avoid third-party “driver updater” tools or unexpected fee pages.
Follow these steps
Plug the wheel directly into the PC
Connect the T98 to a USB port on the computer itself. Avoid USB hubs, docks, or front-panel ports that often cause dropouts.
You should see: The wheel powers on and Windows plays a device-connected sound or lists a new game controller.
Install the official Windows drivers
Open the Thrustmaster support downloads page for your wheel model and install the Windows driver package listed for that product line (T98 / related T128–T248 family drivers if that is what Thrustmaster lists for your unit).
You should see: The installer finishes without errors and the wheel remains listed as a game controller in Windows.
Confirm the wheel in BeamNG Controls
Launch BeamNG, open Options, then Controls, and open the Hardware tab. Check that the T98 is listed.
You should see: The T98 (or Thrustmaster wheel) appears in the Hardware list.
Bind steering and pedals manually
In the bindings section, select Steering, then turn the wheel fully left and right. Repeat for Throttle and Brake by pressing each pedal when prompted.
You should see: Each binding shows input when you move the wheel or pedals.
Test in a short drive
Start a simple map or free roam and gently turn the wheel and press the pedals to confirm control response.
You should see: The vehicle steers and accelerates/brakes according to your inputs.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: Whether the T98 appears under BeamNG Options → Controls → Hardware, and whether turning the wheel or pressing pedals moves the binding bars.
Before you change anything: Confirm the exact wheel model printed on the base or packaging (T98 vs similar Thrustmaster models). Use a rear USB port on the PC if available, not an unpowered hub. Download drivers only from the official Thrustmaster support site for your model. Close other racing games or wheel software that might lock the device.