How do I reset an MD Sports electronic dart board that will not start?
Answer
Power-cycle with the correct adapter, check for a stuck Game, Player, Start, or Reset button, then retry startup before assuming the board is defective.
Before you start: stop right away if…
- Using an adapter with the wrong voltage or polarity can permanently damage the board.
- If the adapter or board smells like burning, unplug it immediately.
Follow these steps
Power-cycle in the right order
Unplug the board, plug the adapter into the wall first, then into the dart board, and watch for startup lights or sounds.
You should see: The board powers on, or it remains completely dark.
Check for a stuck button
Gently press and release Game, Player, Start, Reset, and nearby buttons to free any button that feels stuck or recessed.
You should see: A stuck button pops back up and startup behavior improves.
Verify the adapter rating
Compare the adapter's voltage and polarity with the label on the board. Try a known-good adapter only if it matches exactly.
You should see: You confirm the power supply is correct or identify a mismatch.
Retry a settings reset
With correct power confirmed, use the board's Reset or setup buttons according to the manual to restore default game settings.
You should see: The board starts and accepts a new game setup.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: Whether any button is physically stuck down, whether the adapter label matches the board requirements, and whether any lights appear on power-up
Before you change anything: Confirm the adapter voltage and polarity printed on the board or original supply. Unplug power before pressing around stuck buttons. Do not use a random higher-voltage adapter. Keep the board on a dry, stable surface.