← Back to search

Appliances

Why did the freezer stop making ice after a water filter change?

Answer

Reseat the new filter until it locks, flush several minutes of water, reset the filter light using your model’s button sequence, and confirm the ice maker switch is on. Ice often resumes after a few hours once water pressure returns.

Before you start: stop right away if…

  • Shut off water before removing a leaking filter to avoid floor damage.
  • Do not bend refrigerator water lines sharply while reseating the filter.

Follow these steps

  1. Remove and firmly reseat the filter

    Remove the new filter, then reinstall it until it clicks or locks fully in the housing. Wipe any drips.

    You should see: The filter sits flush and locked with no major leaking.

  2. Flush the dispenser

    Dispense cold water for 2–3 minutes to clear air from the new filter and lines. Expect sputtering at first.

    You should see: Water flows steadily without heavy sputtering.

  3. Reset the filter light

    Use your model’s reset: often hold Filter for about 3 seconds, or follow the Ice Type/Lock combination listed inside the fridge door.

    You should see: The filter or replace light turns off or resets.

  4. Power-cycle the ice maker

    Turn the ice maker off for about one minute, then back on. Make sure the feeler arm or electronic switch is On and the ice bin is seated.

    You should see: The ice maker is on; cubes may take 12–24 hours to refill.

  5. Wait and recheck

    Leave the freezer closed for several hours, then check for new ice. If still none, verify the freezer is near 0°F and the filter fits the model.

    You should see: New ice begins forming, or you can rule out a simple filter-seat issue.

Not sure this is the right page? Check here

0 of 5 checked

Extra tips

What to look for: Ice production stopped right after a filter change, water still dispenses, and a filter or replace-filter light will not reset.

Before you change anything: Note your refrigerator brand and model from the sticker inside the fridge. Place a container under the dispenser before flushing. Do not force plastic filter housings beyond their lock stop.

Have a different problem?