How do I find a replacement head for a Kobalt 40V trimmer?
Answer
Match the replacement to the trimmer's head model (often KMH 1040-03 on Kobalt 40V units) rather than only the serial number. If only the bump knob or spool cover is broken, you may only need that small part instead of a full head.
Before you start: stop right away if…
- Remove the battery before changing the head or spool so the trimmer cannot start while you are working near the cutting line.
Follow these steps
Identify the head model
Remove the battery, then look on the plastic head and the tool's rating label for a head or model number such as KMH 1040-03. Photograph the head and the label so you can match parts accurately.
You should see: You have the head or tool model written down before ordering.
Decide head vs spool parts
If the housing is cracked or the head will not lock on, plan to replace the full head. If only the line is gone or the cap/bump knob is broken, look up the dual-line spool and the separate spool cover for that head. On some parts lists the cover is sold separately.
You should see: You know whether you need a full head or only a spool, cover, or knob.
Order a matching prewound spool or head
Buy a prewound spool or replacement head listed for your exact Kobalt 40V head model and the correct line size. Avoid universal spools that do not name your head.
You should see: The package lists compatibility with your Kobalt head model.
Install and test feed
With the battery removed, install the new head or spool per the parts diagram, reinstall the cover, then run the trimmer briefly and tap the bump knob on the ground to confirm line advances.
You should see: The head stays secure and line feeds when bumped.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: Head model stamped on the trimmer head, serial number on the tool, whether the spool cover, bump knob, or entire head is damaged, and listings that say they fit Kobalt 40V.
Before you change anything: Write down the model and serial from the trimmer label. Note whether the head body, spool cover, or bump knob is the broken piece. Buy parts listed for your exact head model, not a generic fits-most spool.