How do I identify a NordicTrack stationary bike to replace a missing power cord?
Answer
Read the model and serial numbers from the bike’s stickers—often on the upright post under the console or on the side frame—then use those numbers on NordicTrack’s official parts or support site to order the correct power cord. Do not guess a cord by plug shape alone.
Before you start: stop right away if…
- Using the wrong voltage or tip-style adapter can damage the bike console.
Follow these steps
Find the serial and model stickers
Check the white or silver decals again, especially on the bottom of the upright bar that holds the monitor and on the right side of the bike opposite the pedals. Also check under the console and near the stabilizer feet.
You should see: You can read a model name/number and a serial number clearly enough to photograph.
Record every code on the labels
Write down or photograph the model, serial number, and any other printed codes such as a manufacturer number. Even unfamiliar numbers can help NordicTrack identify the bike family.
You should see: You have a complete label record to use for parts lookup.
Look up the power cord by serial or model
On NordicTrack’s official support or parts site, enter the model or serial number and open the parts diagram or accessories list for the power supply/cord. If the site cannot match it, contact NordicTrack support with the photos of the stickers.
You should see: You get a part number for the correct power cord or adapter.
Order and test the matching cord
Order the listed cord or the support-approved equivalent. Before the first ride, connect it securely, confirm the console powers on, and keep the original serial photos with your purchase records.
You should see: The console powers normally with the replacement cord and no adapter forcing or overheating is needed.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: A white or silver serial/model decal on the upright bar under the monitor, on the right side of the frame, or near the base; also any manufacturer or parts codes printed nearby.
Before you change anything: Unplug any remaining cord from the wall before inspecting labels. Photograph every sticker on the bike, including serial and manufacturer codes. Order only a cord listed for that exact model/serial family. Never share account passwords if a parts seller asks for unrelated login codes.