How do you re-pair a Samsung SWA-5000T to rear speakers?
Answer
Power-cycle the soundbar and SWA-5000T, then put the kit into pairing mode and reconnect from the soundbar’s speaker connection menu. Keep the units close until the LINK light stays on.
Before you start: stop right away if…
- Keep ventilation clear around the wireless kit amplifier.
Follow these steps
Power-cycle soundbar and kit
Turn off the soundbar and unplug the SWA-5000T for 60 seconds. Plug the kit back in, power the soundbar on, and watch the LINK light.
You should see: The kit powers up and shows a pairing or link indicator.
Start pairing mode on the SWA-5000T
Press the PAIR or ID button on the SWA-5000T (often on the back) until the LINK light blinks to indicate pairing mode.
You should see: The LINK light blinks ready to pair.
Connect from the soundbar menu
On the soundbar remote, open Settings > Sound or Speaker settings and select Wireless Speaker Connection / Surround speaker pairing. Wait until the LINK light turns solid.
You should see: Rear speakers are listed as connected and play test audio.
Reposition if pairing fails
Move the SWA-5000T closer, reduce Wi-Fi router distance conflicts, and repeat pairing. If it still fails, check Samsung support for a kit reset specific to SWA-5000T.
You should see: A stable wireless link remains after returning the kit to its normal location.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: Samsung SWA-5000T rear speakers no longer play after a power loss, and the wireless kit will not stay linked.
Before you change anything: Place the SWA-5000T within a few feet of the soundbar during pairing. Note soundbar model for menu names. Unplug other unused 2.4 GHz devices nearby if pairing fails.